Banach 3-Lie代数上两类映射的稳定性

结合函数方程pf(x+y/p+z)=f(x)+f(y)+pf(z),研究了Banach 3-Lie代数上的同态、导子以及广义导子的广义Hyers-Ulam稳定性(其中p为固定正整数).     

模具结构对连续纤维增强热塑性复合材料性能的影响

采用自行设计的两种不同结构的熔融浸渍模具制备了连续玻璃纤维增强聚丙烯预浸带，测试了模具结构对预浸带的孔隙率、纤维断裂率、界面形貌、纤维分散均匀度和拉伸强度的影响，建立了纤维浸渍模型和纤维断裂模型，并通过理论模型对预浸带的孔隙率和断裂率进行理论预测。结果表明，本文建立的数学模型能够有效预测预浸带的浸渍程度和纤维断裂率，可用于浸渍模具结构的优化设计；在本文范围内，与波浪形模具相比，斜齿形模具的多楔形区结构可以有效地降低预浸带孔隙率和提升纤维分散程度；波浪形模具的流道圆角半径较大，楔形区个数较少，与斜齿形模具相比，可有效降低纤维断裂率并提升拉伸性能。     

自动驾驶汽车车底边框的优化算法

为了对通过YOLO框架所提取出的汽车底边框进行优化,首先对于道路上的每一辆汽车底部部分像素块建立改进后的高斯混合模型,通过该模型来刻画道路灰度值以及车底阴影灰度值的正态分布规律,然后通过对每辆检测到的汽车进行自上而下的扫描算法以确定汽车边框的实际高度,最后通过进行路测实验来说明算法的可行性与准确性.     

南京长江第四大桥钢箱梁铺装层温度影响系数分析

为了减少现有的钢桥面铺装层车辙深度预估的误差,提出基于长期实测数据的钢桥面铺装车辙评估模型的温度影响系数计算公式。首先对南京长江第四大桥的实测温度概率统计后采用双高斯函数表征其分布;在此基础上修正了现有车辙评估模型中的温度影响系数公式,并利用车辙实测数据对车辙评估模型计算值进行验证。研究结果表明:钢箱梁复合浇筑式铺装层温度可通过双高斯分布描述其概率分布;计入温度影响系数的车辙深度与实际车辙值之间误差较小,相对误差为15.2%。     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

Improved hemimorphite flotation using xanthate as a collector with S(Ⅱ) and Pb(Ⅱ) activation

The flotation of hemimorphite using the S(Ⅱ)–Pb(Ⅱ)–xanthate process,which includes sulfidization with sodium sulfide,activation by lead cations,and subsequent flotation with xanthate,was investigated.The flotation results indicated that hemimorphite floats when the S(Ⅱ)–Pb(Ⅱ)–xanthate process is used; a maximum recovery of approximately 90% was obtained.Zeta-potential,contact-angle,scanning electron microscopy–energy-dispersive spectrometry(SEM–EDS),and diffuse-reflectance infrared Fourier transform spectroscopy(DRIFTS) measurements were used to characterize the activation products on the hemimorphite surface and their subsequent interaction with sodium butyl xanthate(SBX).The results showed that a Zn S coating formed on the hemimorphite surface after the sample was conditioned in an Na2 S solution.However,the formation of a Zn S coating on the hemimorphite surface did not improve hemimorphite flotation.With the subsequent addition of lead cations,Pb S species formed on the mineral surface.The formation of the Pb S species on the surface of hemimorphite significantly increased the adsorption capacity of SBX,forming lead xanthate(referred to as chemical adsorption) and leading to a substantial improvement in hemimorphite flotation.Our results indicate that the addition of lead cations is a critical step in the successful flotation of hemimorphite using the sulfidization–lead ion activation–xanthate process.     

Bidirectional Feedback Dynamic Particle Filter with Big Data for the Particle Degeneracy Problem

Particle Filter(PF) is a data assimilation method to solve recursive state estimation problem which does not depend on the assumption of Gaussian noise, and is able to be applied for various systems even with non-linear and non-Gaussian noise. However, while applying PF in dynamic systems, PF undergoes particle degeneracy,sample impoverishment, and problems of high computational complexity. Rapidly developing sensing technologies are providing highly convenient availability of real-time big traffic data from the system under study like never before. Moreover, some sensors can even receive control commands to adjust their monitoring parameters. To address these problems, a bidirectional dynamic data-driven improvement framework for PF(B3 DPF) is proposed.The B3 DPF enhances feedback between the simulation model and the big traffic data collected by the sensors,which means the execution strategies(sensor data management, parameters used in the weight computation,resampling) of B3 DPF can be optimized based on the simulation results and the types and dimensions of traffic data injected into B3 DPF can be adjusted dynamically. The first experiment indicates that the B3 DPF overcomes particle degeneracy and sample impoverishment problems and accurately estimates the state at a faster speed than the normal PF. More importantly, the new method has higher accuracy for multidimensional random systems.In the rest of experiments, the proposed framework is applied to estimate the traffic state on a real road network and obtains satisfactory results. More experiments can be designed to validate the universal properties of B3 DPF.     

Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing

Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP) in air and submerged friction stir processing(SFSP) under water, and the microstructure, mechanical properties, and corrosion behavior of the NFSP and SFSP samples were investigated. Phase transformation and dynamic recrystallization resulted in fine-grained ferrite and martensite in the processed zone. The SFSP samples had smaller ferrites(5.1 μm), finer martensite laths(557 nm), and more uniform distribution of martensite compared to the NFSP samples. Compared to the base material(BM), the microhardness of the NFSP and SFSP samples increased by 19.8% and 27.1%, respectively because of the combined strengthening effects of grain refinement, phase transformation, and dislocation. The ultimate tensile strengths(UTSs) of the NFSP and SFSP samples increased by 27.1% and 38.7%, respectively. Grain refinement and martensite transformation also improved the electrochemical corrosion properties of the low-carbon steel. Overall, the SFSP samples had better mechanical properties and electrochemical corrosion resistance than the NFSP samples.